Tank Blanketing Regulators

Aug 03, 2015 No Comments
 
mark 608 series

Mark 608 Series – Low-Pressure Gas/Tank Blanketing Regulator

The 1-1/2" and 2" size Mark 608 valves are suitable for large tank blanketing applications and other low-pressure gas regulation.In a tank blanketing application, the Mark 608 is used to control the flow of the blanketing gas into the tank to maintain the proper positive pressure. Once the blanket has been established, a small flow of nitrogen is continually admitted to the tank to keep the blanket fresh.
JV-2C_cmyk

Brochure

Brochure

 
mark 695

Mark 695 Series - Piloted Tank Blanketing Regulator

The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing systems. The pilot operated Mark 695 responds to very small changes in tank pressure by throttling open or closed to maintain the desired pressure set point.
JV-2C_cmykBrochure
 

mark 508

Mark 508 Series – Tank Blanketing Valve

The Mark 508 Gas Back Pressure Regulator is the ideal valve for low-pressure gas regulation. The Mark 508 works in conjugation with the Mark 608 in a low-pressure tank blanketing valve system.
JV-2C_cmykBrochure
 
Mark 518 series

Mark 518 Series - Double Seated Tank Blanketing

The Mark 518 is a back-pressure regulator for use in low pressure air and gas services. With a selection of six pressure ranges, set points can be chosen to control back-pressures from 1" w.c. to 7 psi (3mbar to 0,5 bar). As a standard feature, the MK518 is provided with soft seals for ANSI Class VI shutoff. The valve is also leak-proof under vacuum conditions.
JV-2C_cmykBrochure
 
mark 608 bp

Mark 608BP - Balanced Plug Regulator

The self-contained, low-pressure gas regulator is for use on tank blanketing, gas meter inlet pressure regulating, gas burners and other low-pressure air and gas applications. The valve has a 360° orientation, can be installed in any position, and can be easily repositioned while in line. The seat and plug can be inspected without removing body from the line.
JV-2C_cmykBrochure
 
mark 608 DS

Mark 608DS – Double Seated High Capacity Tank Blanketing Regulator

The Mark 608DS is a double-seated, self-operated gas regulator for use in tank blanketing applications.The double-seated design allows the Mark 608DS to handle increased flow and higher pressure drops than similarly sized single-seat valve types while maintaining ANSI Class VI shutoff.
JV-2C_cmykBrochure
 
mark 608 is

Mark 608IS – Tank Blanketing/Low Pressure Gas Regulator

The Mark 608 IS gas pressure regulator is ideal for low-pressure gas regulation. The self-contained, low-pressure gas regulator is for use on tank blanketing, gas meter inlet pressure regulating, gas burners, and other low-pressure air and gas applications.
JV-2C_cmykBrochure
 
mark 688 series

Mark 688 Series - Piloted Soft Seat Regulator

The Mark 688 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing systems. The pilot operated Mark 688 responds to very small changesin tank pressure by throttling open or closed to maintain the desired pressure set point.
JV-2C_cmykBrochure
 

Ball Valves

Jun 22, 2015 No Comments
 
compact_series ball valve

Electric Compact Series Ball Valve

Safi's series SM includes two models of corrosion resistant, robust and versatile electric actuators, with ISO mounting plates, used with ball valves and butterfly valves.  The fully sealed casings are made of polyethylene or glass reinforced polypropylene for anti-corrosion protection.  Continuous torque's of 30N.m can be delivered with a service ration of 30%.
safi_1

brochure

 

Butterfly Valves

Jun 22, 2015 No Comments
 
dcpd_eccentric_butterfly_valves_0

DCPD Eccentric Butterfly Valves

DCPD Eccentric Butterfly Valves for Corrosive Service. Why use Telene valve in the chlor-alkali cell-house? Telene is a thermosetting resin based on DCPD (dicyclopentadiene) with exceptionally high mechanical and chemical resistance.  Telene is worldwide used in the automotive industries because of its mechanical strengthand impact resistance.
safi_1

brochure

brochure

 
 

Industrial Flanged Ball Valve

Jun 22, 2015 No Comments
 
flanged_ball_valve

Industrial Flanged Ball Valve

SAFI’s integral flanged ball valves from a range of extremely robust and reliable valves for use with corrosive chemicals such as strong acids and alkalies. They offer good alternatives to lined steel diaphragm valves, lined plug valves and lined ball valves. In some services, they outperform valves made of special metals, such as Alloy 20, chromium cast iron, titanium etc... Their resistance to abrasion is good, and they generally perform better in slurries than PTFE lined diaphragm valves.
safi_1

brochure

brochure

brochure

 

High Pressure

Jun 22, 2015 No Comments
 
mark50 high pressure regulator

Mark 50 High Pressure Regulator

Self-Operated Back Pressure Regulators. The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint.  The spring in the Mark 50 holds the sliding gate seats in their normally closed position. The upstream pressure is sensed beneath the diaphragm.  As the upstream pressure exceeds the setpoint, pressure is exerted on the diaphragm which raises the stem to modulate the disc (the movable component of the sliding gate seat set) toward the open position.  As the seats open, upstream pressure will be regulated to the required setpoint.  A decrease in pressure relaxes the spring and diaphragm to move the seats toward the closed position.
jordan_4

brochure

 

Low Pressure

Jun 22, 2015 No Comments
mark508 gas back pressure regulator Mark 508 Gas Pressure regulatorThe Mark 508/608 Series are low flow, low pressure regulators designed to maintain precise gas blanket pressure of storage tanks. Working together, the MK608 and 508 can help reduce nitrogen usage, preserve storage medium, increase safety and protect the environment. jordan_4

brochure

 
mark608 gas pressure regulator

Mark 608 Gas Pressure regulator series

The MK608 Low Pressure Gas Regulators is the ideal valve for low pressure gas regulation.  The self-contained low pressure gas regulator is for use on tank blanketing, gas meter inlet pressure regulating, gas burners and other low pressure air and gas applications.  The MK608 is normally open.  Increases in the outlet pressure are sensed through the aspirator causing the large elastomeric diaphragm to rise, which moves the plug toward the seat.  As outlet pressure decreases, the diaphragm moves down and moves the plug away from the seat to increase flow. The lever, which connects the stem to the diaphragm, amplifies diaphragm forces for tighter shutoff (only available on sizes 3/4" through 1-1/4"). Mark 608 Series - Gas Pressure Regulator Mark 608 IS Series - Gas Pressure Regulator Mark 608 DS Series - Low Pressure Double Seated Gas Regulator Mark 608 BP Series - Balanced Plug Gas Pressure Regulators
jordan_4

mark_608brochure

mark_608bpbrochure

mark_608dsbrochure

mark_608isbrochure

 

Self Operating Regulators

Jun 22, 2015 No Comments
 
mark_60_process pressure regulators

Self-Operated Pressure Regulators

The MK60 Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined setpoint.  The spring in the Mark 60 holds the sliding gate seats in their normally open position to allow the process media to pass through the seats. The downstream pressure is sensed beneath the diaphragm.  As the downstream pressure exceeds the setpoint, pressure is exerted on the diaphragm which raises the stem to modulate the disc (the moveable component on the sliding gate seat set) toward the closed position.  As the seats close, downstream pressure will be reduced to the required setpoint.  A decrease in pressure relaxes the spring and diaphragm to move the seats toward the open position.
jordan_4

brochure

 

Globe and Cage Style Regulators

Jun 22, 2015 No Comments
 
mark58 mark 58 cage trim back pressure regulator

Mark 58 - Cage Trim Back Pressure regulator

The Mark 58 features three ports: a bypass outlet on the bottom, and two side ports which are directly connected to serve as dual inlet and outlet for through-flow
jordan_4

brochure

 

mark686 airloaded cage trim pressure regulator

Mark 686 - Air-Loaded Cage trim Pressure regulator

The Mark 686 features air-loading, high capacities, accurate regulation and easy servicing, making it an exceptional choice for your pressure regulating applications. The diaphragm is easily accessible from the top, allowing maintenance without removing the valve from the line.
jordan_4

brochure

 
mark68_gclr pressure regulator

MK68G Pressure Regulator

The Mark 68G offers high capacity, accurate regulation, and easy servicing, making it the ideal choice for your industrial-grade pressure reducing applications. The diaphragm can be easily accessed from the top allowing some repairs to be conducted without removing the valve from the line.
jordan_4

brochure

 

Sliding Gate regulators

Jun 22, 2015 No Comments
 
mark51_self operating back pressure regulator

MK50 Self Operating Back Pressure Regulator

The Mark 50/51 handles the broadest range of applications including steam, water, oil, gas, air and chemicals. Excellent capacity and the sliding gate trim enable the Mark 50 to quickly and accurately regulate upstream pressure, preventing overpressure situations. The Mark 51 features a larger diaphragm.
jordan_4

brochure

 
mark53 differential pressure regulator

MK53 Differential Pressure Regulator

The Mark 53 is designed to maintain inlet pressure at a set differential pressure over the signal pressure loaded on the diaphragm. The Mark 54 provides the same flow capacity as the Mark 53 but with less offset in controlled pressure due to a larger diaphragm.
jordan_4

brochure

 
mark57 externally operated pressure regulator

MK 57 Externally Operated Back Pressure Regulator

The Mark 57 piloted operated back pressure regulator is designed to accurately control pressure to 100% of its rated flow capacity with only a small deviation from setpoint. The Mark 57 provides accuracy that approaches that of controller-operated valves.
jordan_4

brochure

 
mark60

MK60 Self Operated Pressure Regulator

The MK60 Sliding Gate Pressure Regulator is used to regulate the downstream pressure to a predetermined set point.  The spring in the Mark 60 holds the sliding gate seats in their normally open position to allow the process media to pass through the seats. The downstream pressure is sensed beneath the diaphragm.  As the downstream pressure exceeds the set point, pressure is exerted on the diaphragm which raises the stem to modulate the disc toward the closed position.  As the seats close, downstream pressure will be reduced to the required set point.  A decrease in pressure relaxes the spring and diaphragm to move the seats toward the open position.
jordan_4

brochure

 
mark63 differential pressure regulator

MK63 Differential Pressure Regulator

The Mark 63 is designed to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure loaded on the diaphragm. The Mark 64 provides the same flow capacity but with less offset. The Mark 64 features a larger effective diaphragm area for greater sensitivity.
jordan_4

brochure

 
mark65_vacuum regulator

MK65 Vaccuum Regulators

Jordan vacuum regulators control very accurately and shutoff tightly to maintain the proper vacuums at predetermined settings and to regulate vacuums on evaporators, cookers, grinding fixtures, milking machines, altitude chambers and other vacuum systems
jordan_4

brochure

 
mark66 air loaded pressure regulator

MK66 Air Loaded Pressure Regulator

The Mark 66 is one of the most accurate regulators on the market. The dome loaded functionality and the sliding gate seat provide extremely accurate regulation with excellent flow rangeability. Couple the Mark 66 with an extended range I-P for remote control capability
jordan_4

brochure

 
mark67 pilot operated pressure regulator

MK67 Pilot Operated Pressure regulator

The Mark 67 is for critical pressure reducing applications and provides greater accuracy and lower offset than can be achieved with a self-operated regulator. The Sliding Gate seats provides unsurpassed seat and diaphragm life, ease of installation, simplified maintenance and more accurate performance.
jordan_4

brochure

 

Temperature Regulators

Jun 22, 2015 No Comments
 
mark_80_temperature regulatormark80 self operated temperature regulator

Self-Operated Temperature Regulators

The MK80 Series is completely self-operated and requires no external power source or other expensive instrumentation to operate the valve. The operation of the MK80 is fairly simple. A pre-measured amount of liquid fill is drawn into the thermal system filling the upper diaphragm chamber, the capillary tube, and most of the bulb. As the controlled temperature increases, the volatile liquid fill in the sensing bulb begins to vaporize and creates pressure on the sealed system. This pressure drives the valve stem, closing direct acting valves, or opening reverse acting valves. Because of the shorter stroke length of the sliding gate seats, the MK80 is able to utilize a sealed actuator with a stainless steel diaphragm, and does not require a bellows to operate. To seal the actuator, the upper and lower casings and diaphragm are heli-arc welded around the circumference to create a solid bond. This seal eliminates the need for any type of gasket. All sealing surfaces on the MK80 are metal to metal.
jordan_4

brochure

 

mark86 steam tracing temperature regulator

MK80 Steam Tracing Temperature Regulators

The Mark 86 ambitemp regulator is designed to control steam tracing lines based on ambient temperatures. The MK86 allows steam to flow through the tracer lines only when it is needed, and remains closed when the ambinet temperature rises above the predetermined setpoint.
jordan_4

brochure

 
mark87 external piloted Temperature regulator

MK87 External Piloted Temperature regulator

The Mark 87 piloted temperature regulator is the Sliding Gate valve engineered to provide wide rangeability, and greater accuracy, for a variety of temperature control applications. Designed with the same technology as the Mark 80, the Mark 87 is a piloted temperature regulator that offers quality and performance.
jordan_4

brochure

 
mark89 3 way temperature regulator

MK89 Three way Temperature regulator

The Mark 89 is used for diverting service and is ideal for bypassing fluids around coolers or filters. In this configuration, there is one inlet and two outlets. As one outlet closes, the other outlet opens, diverting flow from one channel to the other. The Mark MK89MX is ideal for mixing service.
jordan_4

brochure